Accessories

Pagod Tent: Locking Pin for Central Pole

Locking Pin for Central Pole – Pagoda Tent
The locking pin is located at the bottom of the pagoda tent’s central pole and plays a key role in ensuring proper and stable assembly. Once the central pole is centered on the cross cables, the locking pin is secured underneath the cross cables.

€ 8,10 excl. VAT - € 9,80 including tax
Pagodetent Bolt for central mast

Bolt for Plastic Slider – Central Pole
Pagoda Tent This bolt is a replacement part for the plastic slider located on the central pole of the pagoda tent. The bolt ensures that the slider remains securely fastened and can move smoothly along the pole while setting up and tensioning the roof fabric.

€ 8,10 excl. VAT - € 9,80 including tax
Central pole for pagoda tents: 3x3m, 4x4m, 5x5m, 6x6m

Central pole for pagoda tent
The central pole ensures that the pagoda tent’s roof fabric is perfectly tensioned.
This component forms the highest point of the structure and ensures that the roof remains taut and stable, even during prolonged use.
This central pole is essential for the proper and durable setup of any pagoda tent.

Price range: €96,60 to €118,90
Pagod Tent Ground Pipe Set 3x3m–4x4m–5x5m–6x6m

Ground Pole Set for Pagoda Tent – 3 × 3 m, 4 × 4 m, 5 × 5 m, 6 × 6 m
This complete ground pole set consists of 8 sturdy poles that are slid through the slits at the bottom of the tent canopy and then attached to the legs of the pagoda tent.
The poles prevent the side walls from blowing inward and significantly increase the stability of the entire structure.
This ground pole set ensures a sturdier, wind-resistant, and more professional setup for your pagoda tent.

Price range: €113,70 to €178,40
Pagoda Tent Pagoda Corner Piece

Corner Bracket for Pagoda Tent
This corner bracket is an essential component of a pagoda tent’s structure.
It is used to securely connect the horizontal tubes to each other and to attach them to the vertical tubes.
This sturdy corner bracket creates a stable and reliable roof and wall frame, contributing to the overall strength of the pagoda structure

€ 71,10 excl. VAT - € 86,03 including tax
Pagod tent keder horizontal tube No. 1 for 3x3m

Horizontal Pole – Pagoda Tent 3 × 3 m

The 3 × 3 m pagoda tent features four 3-meter horizontal tubes, each made from a single piece.
These tubes form the entire roof structure of the tent and also serve as guides for the side walls, which are slid into the profiles using piping.

€ 178,20 excl. VAT - € 215,62 including tax
Pagod tent keder horizontal tube No. 1 for 4x4m

177 cm Horizontal Tube – 4 × 4 m Pagoda Tent
This 177 cm horizontal tube is a component of the roof structure of a 4 × 4 meter pagoda tent.
Together with a second identical tube, this tube forms a single complete horizontal support beam of the roof frame, into which the side walls are also slid.
Both tubes are securely connected to each other with a coupling piece.

€ 99,60 excl. VAT - € 120,52 including tax
Pagoda Tent: Keder for Horizontal Tube No. 2

The pagoda tent is equipped with 4 vertical poles.
The same vertical poles are used for all sizes (3 x 3 m, 4 x 4 m, 5 x 5 m, and 6 x 6 m).

The vertical tubes are mounted under the roof frame.

Important: Always install the vertical tubes with the piping slot facing upward.
The piping slots at the bottom must be positioned at a 45° angle relative to the side walls.
This ensures proper installation of the piping side walls and an optimal fit.

€ 116,40 excl. VAT - € 140,84 including tax
Pagod tent keder horizontal tube No. 1 for 5x5m

Horizontal Tubes – 5 × 5 m Pagoda Tent
The 5 × 5 m pagoda tent features 8 horizontal tubes, each 227 cm long and made from a single piece.
These tubes form the roof structure and feature the channel profile into which the side walls are slid for a wind- and watertight finish.
To assemble one complete horizontal tube, you need two 227 cm tubes.
You can easily connect these using a connector (not included).

€ 125,70 excl. VAT - € 152,10 including tax
Pagodetent horizontal tube No. 1 for 6x6m

Horizontal Tube – 6 × 6 m Pagoda Tent
This 282 cm horizontal tube is used in the roof frame of a 6 × 6 meter pagoda tent.
The tube forms part of the roof structure into which the side walls are slid for a completely wind- and watertight seal.
One complete horizontal tube requires two 282 cm tubes, which are connected to each other with a coupling.

€ 183,40 excl. VAT - € 221,91 including tax
Cross cable for 3x3m pagoda tent (1 piece)

Cross Cable for Pagoda Tent
A pagoda tent features two cross cables that are attached diagonally to the roof frame.
These cables increase the sturdiness of the entire roof frame and ensure that the weight and tension of the roof fabric are distributed optimally.
The tent’s central pole rests at the intersection of these two cables, keeping it exactly in the center and ensuring the structure remains stable.
This item includes one cross cable.

€ 37,20 excl. VAT - € 45,01 including tax
Pagod tent cross cable for 4x4m (1 piece)

Cross Cable for Pagoda Tent
A pagoda tent features two cross cables that are attached diagonally to the roof frame.
These cables increase the sturdiness of the entire roof frame and ensure that the weight and tension of the roof fabric are distributed optimally.
The tent’s central pole rests at the intersection of these two cables, keeping it exactly in the center and ensuring the structure remains stable.
This item includes one cross cable.

€ 40,60 excl. VAT - € 49,13 including tax
Pagod tent cross cable for 5x5m (1 piece)

Cross Cable for Pagoda Tent
A pagoda tent features two cross cables that are attached diagonally to the roof frame.
These cables increase the sturdiness of the entire roof frame and ensure that the weight and tension of the roof fabric are distributed optimally.
The tent’s central pole rests at the intersection of these two cables, keeping it exactly in the center and ensuring the structure remains stable.
This item includes one cross cable.

€ 52,90 excl. VAT - € 64,01 including tax
Pagodetent cross cable for 6x6m (1 piece)

Cross Cable for Pagoda Tent
A pagoda tent features two cross cables that are attached diagonally to the roof frame.
These cables increase the sturdiness of the entire roof frame and ensure that the weight and tension of the roof fabric are distributed optimally.
The tent’s central pole rests at the intersection of these two cables, keeping it exactly in the center and ensuring the structure remains stable.
This item includes one cross cable.

€ 50,50 excl. VAT - € 61,11 including tax
Pagod Tent Plastic Slider for Central Pole

Plastic Slider for Center Pole – Pagoda Tent
This plastic slider is part of the center pole of a pagoda tent and ensures that the pole slides smoothly and without friction over the cross cables during assembly.
It prevents damage to both the pole and the cables and ensures that the center pole is positioned correctly.

€ 20,50 excl. VAT - € 24,81 including tax
Pagod Tent Rain Gutter 3m (for and without valance)

Rain Gutter for Pagoda Tents – 3 m
This rain gutter is designed to seamlessly connect two pagoda tents with a side length of 3 meters. The gutter is easily attached to the horizontal poles using Velcro loops and ensures a watertight connection between the two tents.

€ 71,60
Pagoda Tent Rain Gutter 4m (for and without valance)

Rain Gutter for Pagoda Tents – 4 m
This rain gutter is designed to seamlessly connect two pagoda tents with a side length of 4 meters.
The gutter is easily attached to the horizontal poles using Velcro loops and ensures a watertight connection between the two tents.

€ 81,30
Pagoda Tent Rain Gutter 5m (for and without valance)

Rain Gutter for Pagoda Tents – 5 m
This rain gutter is designed to seamlessly connect two pagoda tents with a side length of 5 meters.
The gutter is easily attached to the horizontal poles using Velcro loops and ensures a watertight connection between the two tents.
This rain gutter guarantees a neat, secure, and completely dry connection between two pagoda tents.

€ 96,60